top of page
Search
Design Method for Steel Gerber Systems
Vincent Malazo (M.Sc.) Dr. Imanpour Gerber systems are the common structural steel roof framing systems used in Canada to resist gravity...
The Steel Centre
May 8, 20201 min read
703 views
0 comments


Progressive collapse in composite steel frame structures
Safa Masajedian (Ph.D.) In a progressive collapse event, a single structural failure causes a disproportionately large collapse in the...
Safa Masajedian
Jul 5, 20171 min read
231 views
0 comments


Extended shear tab connections
Victoria Buffam (M.Sc.) Extended shear tab connections are efficient for both fabrication and erection as they eliminate the need to cope...
The Steel Centre
Nov 13, 20161 min read
345 views
0 comments


Cost-effective connections for columns under torsional loads.
Riley Quintin (M.Sc.) It is relatively common for torsional loads to be included in the design of members in industrial steel structures....
The Steel Centre
Nov 12, 20161 min read
146 views
0 comments


Residual stresses in welded girders
Daniel Unsworth (M.Sc.) Dr. Driver, Dr. Leijun Li Concerns have been raised that current Canadian design standards overestimate the...
The Steel Centre
Nov 11, 20161 min read
191 views
0 comments


Evaluating design standards for lateral-torsional buckling
Dimple Ji (M.Sc.) Dr. Driver, Dr. Imanpour The lateral-torsional buckling design provisions were developed decades ago and, since then,...
The Steel Centre
Nov 10, 20161 min read
256 views
0 comments
bottom of page